Work has begun on framing in the front entry, using 3/8-inch stock to match the existing structure. I chose a set of Houseworks French doors, installed backwards so they open outward. There will be a 5-inch wide transom window above. The door woodwork is finished in an eggshell white stain, and the two side panels will be reclaimed weathered gray horizontal planking.
I got curious about the line weights in intricate pattern that I might successfully cut (and remove from the mat) on the Cricut, and got down to 6 points (.083-inch / 2.1 mm). This seems a good scale for the narrow panels of the doors and transom (the greenhouse window leading is 9 points (.125- inch / 3.2 mm).
The difference in scale between the front doors and the greenhouse windows makes sense (especially now that I know I can cut finer line weights). The interior front wall will be planked in the eggshell white stain, with a matte varnish.
Now I’m thinking on how the ceiling between the main floor and the sleeping loft will work, and how to finish out the fireplace through to the roof — some tricksy geometries. I ordered a bunch of vegetable kits from Georgie Steeds at The Miniature Garden — my favorite miniature plant kit purveyor — to populate the long shelf in the greenhouse. The interior greenhouse windows are open to the room so the potted trees can reach out.
Also, how is it almost November?!