Newsletter, Calendar, Party

2016/12/312016/12/3110 Comments

calendar2017_project

There’s a new issue of my newsletter Cut, Fold + Make going out tonight that includes a modern miniature calendar for you to make.

calendar_gluing

It’s a quick and simple project.

calendar2017_finished

You can sign up to receive it with the newsletter link on the right.

mms_calendar2017

It’s a good way to keep track of yourself in sequential time.

mms_party_123116

And, there’s a party going on to celebrate the new year and new pergola being built at Modern Miniature Succulents + Sundries. All the furniture from Sea House Warming Hut has been dragged over, and there’s a beach driftwood fire blazing, as well as festive beverages. Come on by! It’s been too long since we’ve all hung out together.

godzilla_123116

PS: Godzilla will be there.

EOE

2016/12/228 Comments

mmss_godzilla

Modern Miniature Succulents + Sundries has a new employee. Godzilla [2014] is from Bandai, and is “Pursuing Character Expression through Monster Action”. Welcome!

Courtyard Set

2016/12/072016/12/0811 Comments

floor

I wanted to build a courtyard set in which to photograph the miniature succulents, and I didn’t want to spend a lot of time doing it. I mulled it over conceptually for a few days, then remembered I had this egg carton paved floor from a few years ago. It had been sealed, so I grouted it with DAP spackle.

end_wall

I spent about half a day going through all my MDF scrap, windows, doors and gates, dry-fitting various combinations to fit the floor. And getting frustrated when they inevitably collapsed, as all dry-fits do. All the while sighing with that sinking feeling of I really don’t want to do all the work of cutting, patching, painting, sanding. Then I remembered I didn’t have to, and settled on a peaked end panel from a garage kit, and a length of half-inch foamboard for the long back wall. I mixed up a stucco slurry from some fine texture medium, thinned acrylic paint and a little tacky glue. It was a very enjoyable application :)

drying

After gluing the pieces together, I put it on the floor in front of my wee-yet-powerful Dyson heater to dry overnight.

done

Today I added a few pieces of wood trim — a cross beam and some posts — all stained leftovers from Argo Wool Works, and called it done. Actually, tomorrow I’ll drill some holes and add small nails and dowels for increased stability. Also I’m currently incubating designs for building anchor stars to cut on the Cricut and a few implementations of MMS+S signage :)

deco_vase

Here are some vases that will be available real soon over at Modern Miniature Succulents + Sundries. (These are just my prototype succulents; the actually plants have thinner stems.) Above is a turquoise-glazed porcelain Art Deco vase, about an inch tall.

seahorse_vase

This is a glazed porcelain vase sculpted with cavorting sea horses.

lady_face_vase

And one of my freaky favorites, a reproduction of an ancient 15th–13th century vase marked Chypre (Cyprus). Fierce! Nasty!

cyrpus_vessel

Update: Original vessel is in The British Museum, whose website is impossibly slow, but I found this image on a Pinterest board. “Glazed composition vessel in form of woman’s head. Ancient Cyprus in the British Museum”.

cyprus_zoltar

For you, Pepper.

hens test

2016/12/022016/12/026 Comments

hens_holes

Hen and chicks are one of the first succulents I fell in love with, so this design is dear to my heart. And I felt like a right genius because I figured out how to get the machine to cut a hole in each center. It is not an automatic process and involves what Cricut calls “attaching” layers. (The above holes are three points in diameter; I’ve since upped it to four.)

hens_fun_part

This is the fun part. Removing the waste from the sticky mat makes a musical plinking sound that is very satisfying. And as I soon learned and as Nora suggested, it’s far easier to remove the cut shapes after the mat has been “de-sticked” a bit — which seems to happen with use.

hens_shaping

Color test and shaping. The little point on the end of each leaf adds such sweet realism. My inspiration:

live

These guys are in a bit more shade now in my early winter backyard, so they’ve lost most of their edge-leaf color.

hens_proto

Prototype hen. Next up is to draft a smaller-leaved pattern set for the chicks, so we can build happy succulent families. This one is about 5/8-inch (16 mm) across.

hens_storage

And this is how I’m keeping all the very many parts organized and identified. I’ve long kept a stash of these useful little containers from takeout food, but ran out quickly. Dollar store to the rescue! Ten cups with lids/$1. I should probably cost them out in greater quantities :(

Testing

2016/12/012016/12/0117 Comments

first_test_cut_120116

I drew some succulent patterns in Illustrator and exported them as SVG. The Cricut Design Space, the app the cutter uses, is fairly straight forward and easy to navigate. First cuts! The sticky cutting mat smells like a toxic headache, though.

more_120116

Here’s the first batch. The software arranges the cuts for best use of the material.

shapes_120116

By far the most difficult and tedious task is removing my many, many small shapes from the cutting mat.

stack_120116

A proposed stack. As it turns out, the two 11-leaved pieces don’t work well at all for miniature succulents.

prototype_120116

Here’s a first model and prototype. I’ll need to make some several before I work out the best construction techniques.

12x12_120116

After revising the patterns, I cut a 12 x 12-inch sheet of colored stock. That’s a lot of prying off to do. Best tool I’ve used thus far is a thin, flexible wedge-shaped palette knife. The next thing I want to determine is if the pen can have a broader tip, and can outline the cut line, and hold registration with the cutter. Learning!

New Echeveria Kit in Development

2016/11/302016/11/307 Comments

ec01_color_113016 Experimenting with color for a new echeveria kit for the shop. This is two shades of green and an orange on white stock.

ec01_shaping_113016

Shaping with a fine point stylus.

ec01_building_13016

Trying out construction techniques and build sequences. This succulent is wonderfully small, just a half-inch (13 mm) in diameter.

houses_blog

The first issue of my newsletter, Cut, Fold + Make, goes out tonight! Look for it in your inbox on the first of each month. Included is a free pattern to make these iconic, and very versatile little paper houses.

arrived_113016

And possibly most exciting of all the things: this just arrived. Let’s get started.

New Kit

2016/11/27Leave a comment

scarlett_sv02_112716

Listed another kit in the Etsy shop, a larger, more-specimeny succulent that pairs nicely with SV01. Continued heartfelt gratitude and thanks for your warm wishes and interest. I wish I had like a whole line plan to lay out — and I do! In my head! — instead of this kit-by-kit piecemeal showing. And soon, on offer, completed specimens, in some of the most wonderful containers I’ve ever seen! However. I am learning by doing, and this is bootstrap crafty business making. Rhetorical question: would we have it any other way?

First Listing

2016/11/262016/11/2612 Comments

So pleased to announce the first kit is available over at MMS+S. I expect I’ll be making editing tweaks for a while, in between assembling and listing new kits. Potted specimen succulents and sundries coming real soon. Heartfelt thank yous to all who showed interest. Happy making!

Just Kitting

2016/11/222016/11/2314 Comments

sv01_kitbag_112216

First article! Well almost. I’m waiting on the brown kraft paper to arrive, and, having just finished re-re-shooting the instruction photos, to get those printed.

sv01_kit_contents

What’s in this kit? There are options for white, cream or sage green stock, as well as for me to color the leaves (US$5 extra; I may live to regret it :) One kit makes seven stems, with extra leaves to practice on. The example is the yellow-edged green variety, but of course you can paint them as you like. There’s a special hashtag to use if you post on socials, so we can all see what people are coming up with.

sv01_making

sv01_finish2

sv01_finish

Need to finish writing *all* the stuff for the Etsy listings and blahblah. And then let it go live. Gulp.

Redirect

2016/11/202016/11/207 Comments

stretch1_112016

First light, and we’re continuing to enjoy some much-needed rain here in Northern California. There’s bustle going on downstairs in the studio, but it’s uninteresting compared to Scarlett, sleeping off an early morning foray into the great suburban outdoors.

stretch2_112016